¶ Digifort Configuration
This section covers Digifort configuration with CredoID. Digifort server already needs to be running in order to use it with CredoID. For Digifort installation follow Digifort instructions.
¶ Adding the device
- Navigate to "Hardware" -> "Devices" tab.
- Click "Add" button.
- Select "Digifort server"from the list and click "Select".
- Device Name: type unique name for device.
- Identifier: type identifier, which must be unique in the CredoID system.
- Username: type Digifort server username.
- Password: type Digifort server password.
- Description: type device description, field is optional.
- IP address: type server address.
- Port: default value 8601.
- Click "Save" button.
Device status should change to "Online" few moments after saving.
Without setting a password in "Digifort" client - "CredoID" will not be able to capture live stream.
¶ Cameras detection
- Navigate to "Hardware" -> "Devices" tab and click on configured device.
- Click on "Devices Modules" tab.
- Click "Discover" button to detect cameras.
- Click "Save" button.
¶ LPR Setup
For license plate recognition to work - Digifort license with additional LPR Engine license (Carmen, NeuralLabs or OpenALPR) is needed.
- Navigate to "Hardware" -> "Doors" and click "Add".
- "Door details" menu should open, enter desired name.
- Navigate to "Entry reader" settings.
- Select "Reader" as door device type.
- Select "LPR"* as module.
- Select "LPR Camera" as reader address.
- Select "Card only" as authentication mode.
- Click "Save".
Module name depends on your LPR configuration name in "Digifort" client.
- Navigate to "Automation" -> "Triggers" and click "Add".
- Create a filter - select previously created "Digifort" doors from "Doors" category and "Access granted" from "Event types" category.
- Add triger action - select "Devices", then "Trigger door strike relay" and click "Select".
- Click "Create filter" in "Actions" section and select which "Doors" will grant access after successfull license plate recognition and click "Save".
- Click "Save".
Now you can test the system, just don't forget to add license plate number to users identification set.