Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Connect an Ethernet cable to the controller and enable controllers default settings, by turning ON switch '2' in DIP switches.
  2. Open web browser and connect to controller over IP address: 192.168.0.251
  3. Note: use Firefox browser to avoid certificate validation errors.



  4. Turn on switch "1" to enable default login details:
    Username: admin
    Password: password
  5. At "Network" tab configure IP address of the device.
  6. At "Host Comm"  set connection type to "IP Client".
  7. "Host IP" to machine address, where CredoID service is running. Set "Connection Mode" to "Continuous".
  8. Data Security: TLS Required.
  9. Port number: 3002
  10. Press "Accept" and then "Apply Settings". Set all switches to OFF.

...